WorldSkills 2013 · Leipzig, Germany
CNC Milling — Test Project 2
3D Model
Loading 3D model…
Drag to rotate · Scroll or pinch to zoom · Right-drag or two fingers to pan
Engineering Drawing

Behind this model
I modelled this part in Siemens NX during the 2020–2021 lockdown, working from this A3 photocopy of the drawing. I still have it, and you can see a few of my pencil notes on it, where the drawing made me stop and check.
Machining Notes
This test project from WorldSkills 2013 in Leipzig is a two-sided part: the drawing shows features on both the top and the bottom, so it needs at least two setups. Use Show bottom on the 3D model to see the second side.
Key features (from the drawing)
- Overall size 97 × 147 mm
- M30 × 1.5 internal thread
- Two precision bores: Ø24 H7 (24.000–24.021) and Ø22 H7 (22.000–22.021)
- General tolerance ±0.1 mm unless stated otherwise
- All edges broken 0.2–0.3 × 45°
- Surface finish Ra 0.8, with Ra 1.6 where indicated
Things to watch
- H7 bores need a finishing operation (reaming or fine boring). Check them with a bore gauge or plug gauge, not only a caliper.
- Plan the setups so that the bottom features can be located from surfaces finished in the first setup.
- Break every edge to 0.2–0.3 × 45° before the part leaves the machine. It is easy to miss small edges inside pockets.
Medallists · WorldSkills 2013
- Gold Sung Jae No Korea
- Gold Henrique Santana Brazil
- Bronze Haibo Xie China
- Bronze Pascal Sieber Switzerland
CNC Milling results from the official WorldSkills results. Equal scores share a medal, so some years have two golds or no bronze.
Downloads
The 3D model is a compressed glTF (.glb) file. It opens in Blender, the online glTF Viewer and most 3D apps.